Direnza

BMW 4 Series F32 F33 F36 435i 3.0 N55 13-16 – Cold Air Induction Kit

All Direnza Cold Air Induction Systems are supplied with a three-inch diameter air filter manufactured from high quality, washable cotton, ensuring long-lasting performance enhancements.

Includes lightweight alloy pipework mandrel-bent for accurate placement on your BMW, and coated with a premium grade, black textured finish for a sleek appearance.

Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance.

Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment.

  • Provides a performance increase of +14.4Hp and 17.5Nm* of torque
  • Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity
  • Engineered to help the engine breathe easier and improve throttle response
  • A great way to provide your 435i with a performance soundtrack
  • Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses


* Please Note:
This induction kit was tested on our M135i test car

Fitment

BMW 4 Series 435i (F32 Coupe) 3.0 N55 – 2013-2016 models
BMW 4 Series 435i xDrive (F32 Coupe) 3.0 N55 – 2013-2016 models
BMW 4 Series 435i (F33 Convertible) 3.0 N55 – 2013-2016 models
BMW 4 Series 435i xDrive (F33 Convertible) 3.0 N55 – 2013-2016 models
BMW 4 Series 435i (F36 Gran Coupe) 3.0 N55 – 2013-2016 models
BMW 4 Series 435i xDrive (F36 Gran Coupe) 3.0 N55 – 2013-2016 models

Please Note: Suitable for manual models ONLY

In stock

£259.99

In stock

Quantity

Buy 2 Products

5%

Order any two products to get 5% off your whole order

Buy 3 Products

10%

Order any three products to get 10% off your whole order

Buy 4 or More Products

15%

Order four or more products to get 15% off your whole order

*DOES NOT INCLUDE MERCHANDISE

Additional information

Weight 10 kg
Product Category

Air Induction

Part Number

DZAK018

Pipe Bore 1 (mm)

85mm

Pipe Bore 2 (mm)

90mm

Silicone 1 (mm)

89mm

Clamps

3 x 78 – 101mm

Fittings

1 x

Bolts

8 x Bolts

Sensor Ports

1 x

Cir Clips

1 x Spire clip

Other

1 x Heat shield 2 x Trim pieces

All Direnza Cold Air Induction Systems are supplied with a three-inch diameter air filter manufactured from high quality, washable cotton, ensuring long-lasting performance enhancements.
Includes lightweight alloy pipework mandrel-bent for accurate placement on your BMW, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment.
  • Provides a performance increase of +14.4Hp and 17.5Nm* of torque
  • Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity
  • Engineered to help the engine breathe easier and improve throttle response
  • A great way to provide your 435i with a performance soundtrack
  • Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses
* Please Note: This induction kit was tested on our M135i test car

At Direnza we offer you our best prices but to do this all our website prices only include delivery to the UK mainland. If your delivery address is outside the UK mainland please be aware there may be additional shipping charges. If this is the case; we will contact you before any payment is processed.

We aim to dispatch all orders within 3 working days. If there is going to be a delay with dispatching your order we will contact you to advise you of this.

We buy all our products in bulk in order to keep prices low and ensure we always have what you’re looking for in stock. However there may be occasions we are out of stock of a product you have ordered. If this is the case we will notify you as soon as possible and refund any payments made for the product in question.

Any goods found to be faulty within 12 months of purchase will be repaired and where this is not possible, replaced. Please be aware that Direnza will not be held responsible for any labour costs incurred for fitting of our products whether faulty or not.

Please note all items must be installed by a qualified mechanic at a registered garage. Failure to do this will invalidate any warranty and returns policy. For information on warranty offered on your purchase, please either contact us by email at sales@direnza.co.uk or phone us on +44 (0) 844 448 2002.

Along with this, if you no longer require any items within your order, you have 14 days after delivery to cancel your order and return the goods back to us. All of our products are made with the highest quality materials and checked prior to dispatching.

If you have any issues with your product, you have the right to contact us and for us to get the issue resolved, in accordance of the Consumer Rights Act 2015.

BMW 4 Series F32 F33 F36 435i 3.0 N55 13-16 – Cold Air Induction Kit

£259.99

In stock

Quantity